Furniture edge banding glue is a very common material in daily life. Today Qingdao Sainuo polyethylene wax manufacturer will introduce you to several characteristics of furniture edge banding glue.

1. Main material

The main material of furniture edge banding glue is thermoplastic resin or elastomer, which is the main component of hot melt glue.

2. Wax

Wax is also one of the main components of hot melt adhesives. Its function is to reduce the melt viscosity of hot melt adhesives, improve fluidity, shorten the exposure time, improve creep resistance, flexibility and melting speed, and reduce stringing Appearance to avoid self-adhesive rubber, etc., can also reduce the cost of adhesives. Such as polyethylene wax.

3. Filler

Fillers are often added to hot melt adhesives to reduce costs and reduce the volume reduction rate and excessive permeability after curing. The amount of fillers is generally below 15% (mass fraction). Adding too much will increase the viscosity of the adhesive. Decrease adhesion and resistance.

4. Plasticizer

Adding plasticizer to furniture edge banding glue can reduce the melt viscosity, accelerate the melt speed, and improve flexibility and cold resistance. The amount generally does not exceed 10% (mass fraction). Excessive amount will reduce the heat resistance and internal Poly strength and bonding strength. 

5. Antioxidant

The role of antioxidants is to avoid oxidation and differentiation of hot melt adhesives, to avoid adhesive degradation and decrease in bonding strength. The amount of antioxidant is generally 0.1% to 1.5% (mass fraction).

Qingdao Sainuo Chemical Co.,Ltd. We are manufacturer for PE wax, PP wax, OPE wax, EVA wax, PEMA, EBS, Zinc/ Calcium Stearate…. Our products have passed the REACH, ROHS, PAHS, FDA testing.

Sainuo rest assured wax, welcome your inquiry!

Website：https://www.sainuowax.com

E-mail：sales@qdsainuo.com

               sales1@qdsainuo.com

Adress：Room 2702,Block B, Suning Building, Jingkou Road, Licang District, Qingdao,China