News

Qingdao Sainuo polyethylene wax for color masterbatch has high molecular weight, high viscosity, Both lubrication and dispersion; the dispersion performance is equivalent to BASF A wax and Honeywell AC6A.

Sainuo polyethylene wax for color masterbatch has high molecular weight, high viscosity, Both lubrication and dispersion; the dispersibility of this pe wax​ is equivalent to BASF A wax and Honeywell AC6A.

Sainuo calcium stearate ​has no sulfur pollution, good long-term thermal stability, good lubrication and demoulding performance. Calcium stearate is a white fine powder, non-toxic. Insoluble in water, slightly soluble in hot ethanol and hot vegetable oil, easily soluble in hot pyridine. The relative density is 1.08 and the melting point is 179 ℃. It has water absorption in air. In case of strong acid, it is decomposed into stearic acid and corresponding calcium salt.

Qingdao Sainuo polyethylene wax powder has high molecular weight, high viscosity, Both lubricating and dispersing, it’s dispersion performance is equivalent to BASF A wax and Honeywell AC6A. It widely used in high concentration difficult to disperse masterbatch; PVC soft rubber granulation and metallurgical injection,etc.

Qingdao Sainuo manufactures not only polyethylene wax, oxidized polyethylene wax, EBS, Stearate, PETS, but also refined Fischer Tropsch wax. Recently, raw materials are rising, and the price is also rising. If you need it, please contact us. In this article, Qingdao Sainuo takes you to know about the application of Fischer Tropsch wax in the plastic industry.

Octadecanoic acid, as we often call it, is actually called stearic acid. Its salt formed with metal ions is called stearate. There are three common kinds: zinc stearate, calcium stearate and barium stearate. Today we'll talk about the characteristics, uses and preparation methods of these three stearates.

Calcium carbonate filling masterbatch is a particle with similar volume to the base resin of plastic products, which is made by mixing, mixing and granulating calcium carbonate and carrier resin. It has a wide application value in the plastic industry. Before the masterbatch processing, the surface of calcium carbonate powder is modified to increase its dispersion, which can greatly improve the cross-linking with the resin. polyethylene wax​ for filling masterbatch

PVC external lubricant: difference between Fischer Tropsch wax and PE wax

What role does polyethylene wax play in hot melt adhesive? Wax is the most effective regulator of hot melt adhesive performance. The melting viscosity of wax itself is very low, which can reduce the melt viscosity and surface tension of hot melt adhesive. It is used to improve the surface wettability and adhesion of hot melt adhesive when bonding metal and plastic, so as to improve the bonding performance of hot melt adhesive to these materials within a certain limit.

In today's article, Qingdao Sainuo will introduce you to our lubrication dispersion system, with applicable product models in various industries.

Application of oleic acid amide and erucic acid amide

The plastic modification formula seems simple, but there are hidden mysteries, which requires us to be cautious when selecting plastic additives. Today, Qingdao Sainuo polyethylene wax manufacturer will introduce you to the selection of additives from the following six aspects on how to obtain formulas with higher performance, low cost and easy processing.